diff --git a/doc/rpi.md b/doc/rpi.md
new file mode 100644
index 00000000..c3f2f5b8
--- /dev/null
+++ b/doc/rpi.md
@@ -0,0 +1,32 @@
+# Raspberry Pi
+
+ENiGMA½ can run under your Linux / RPi installation! The following instructions should help get you started.
+
+## Tested RPi Models
+###Model A
+Works, but fairly slow (Node itself is not the fastest on this device). May work better overlocked, etc.
+
+##Example Configuration: RPi Model A + Minibian
+
+### Basic Instructions
+
+1. Download and `dd` the Minibian .img file from https://minibianpi.wordpress.com/ to a SDCARD. Cards >= 16GB recommended.
+2. After booting Minibian, expand your file system. See http://elinux.org/RPi_Resize_Flash_Partitions#Manually_resizing_the_SD_card_on_Raspberry_Pi for information.
+3. Update & upgrade: `apt-get update && apt-get upgrade`
+4. It is recommended that you install `sudo` and create an admin user: `apt-get install sudo`, `adduser <yourname>`, `adduser <yourname> sudo` (reboot & login as the user your just created)
+5. We want to build dependencies with a updated version of GCC. The following works to install GCC 4.9 on Minibian "wheezy":
+a. Update */etc/apt/sources.list* replacing all "wheezy" with "jessie"
+b. `sudo apt-get update`
+c. `sudo apt-get install gcc-4.9 g++-4.9`
+d. Update */etc/apt/sources.list* reverting all "jessie" back to "wheezy"
+e. `sudo apt-get update`
+f. Update alternatives: `sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.9 60 --slave /usr/bin/g++ g++ /usr/bin/g++-4.9`
+6. Install dependencies: `sudo apt-get install make python libicu-dev libssl-dev git`
+7. Install the latest Node.js from here: http://node-arm.herokuapp.com/ (**only download the .dep and dpkg install it!**)
+8. The RPi A has very low memory, we'll need a swap file: 
+a. `sudo dd if=/dev/zero of=tmpswap bs=1024 count=1M`
+b. `sudo mkswap tmpswap`
+c. `sudo swapon tmpswap`
+9. Clone enigma-bbs.git
+10. Install dependencies. Here we will force GCC 4.9 for compilation: `CC=gcc-4.9 npm install`
+11. Follow generic setup for creating a config.hjson, etc. and you should be ready to go!