--- layout: page title: BSO Import / Export --- ## BSO Import / Export The scanner/tosser module `ftn_bso` provides **B**inkley **S**tyle **O**utbound (BSO) import/toss and scan/export of messages EchoMail and NetMail messages. Configuration is supplied in `config.hjson` under `scannerTossers.ftn_bso`. > :information_source: ENiGMA½'s `ftn_bso` module is not a mailer and **makes no attempts to perform packet transport**! An external [mailer](http://www.filegate.net/bbsmailers.htm) such as [Binkd](https://github.com/pgul/binkd) is required for this task! ### Configuration Let's look at some of the basic configuration: | Config Item | Required | Description | |-------------|----------|----------------------------------------------------------| | `schedule` | :+1: | Sets `import` and `export` schedules. [Later style text parsing](https://bunkat.github.io/later/parsers.html#text) supported. `import` also can utilize a `@watch:` syntax while `export` additionally supports `@immediate`. | | `packetMsgEncoding` | :-1: | Override default `utf8` encoding. | `defaultNetwork` | :-1: | Explicitly set default network (by tag found within `messageNetworks.ftn.networks`). If not set, the first found is used. | | `nodes` | :+1: | Per-node settings. Entries (keys) here support wildcards for a portion of the FTN-style address (e.g.: `21:1/*`). See **Nodes** below. | `paths` | :-1: | An optional configuration block that can set a additional paths or override defaults. See **Paths** below. | | `packetTargetByteSize` | :-1: | Overrides the system *target* packet (.pkt) size of 512000 bytes (512k) | | `bundleTargetByteSize` | :-1: | Overrides the system *target* ArcMail bundle size of 2048000 bytes (2M) | #### Nodes The `nodes` section defines how to export messages for one or more uplinks. A node entry starts with a [FTN address](http://ftsc.org/docs/old/fsp-1028.001) (up to 5D) **as a key** in `config.hjson`. This key may contain wildcard(s) for net/zone/node/point/domain. | Config Item | Required | Description | |------------------|----------|---------------------------------------------------------------------------------| | `packetType` | :-1: | `2`, `2.2`, or `2+`. Defaults to `2+` for modern mailer compatibility. | | `packetPassword` | :-1: | Optional password for the packet | | `encoding` | :-1: | Encoding to use for message bodies; Defaults to `utf-8`. | | `archiveType` | :-1: | Specifies the archive type (by extension or MIME type) for ArcMail bundles. This should be `zip` (or `application/zip`) for most setups. Other valid examples include `arc`, `arj`, `lhz`, `pak`, `sqz`, or `zoo`. See [Archivers](../configuration/archivers.md) for more information. | **Example**: ```hjson { scannerTossers: { ftn_bso: { nodes: { "21:*": { // wildcard address packetType: 2+ packetPassword: D@TP4SS encoding: cp437 archiveType: zip } } } } } ``` #### Paths Paths for packet files work out of the box and are relative to your install directory. If you want to configure `reject` or `retain` to keep rejected/imported packet files respectively, set those values. You may override defaults as well. | Key | Description | Default | |-----|-------------|---------| | `outbound` | *Base* path to write outbound (exported) packet files and bundles. | `enigma-bbs/mail/ftn_out/` | | `inbound` | *Base* path to write inbound (ie: those written by an external mailer) packet files an bundles. | `enigma-bbs/mail/ftn_in/` | | `secInbound` | *Base* path to write **secure** inbound packet files and bundles. | `enigma-bbs/mail/ftn_secin/` | | `reject` | Path in which to write rejected packet files. | No default | | `retain` | Path in which to write imported packet files. Useful for debugging or if you wish to archive the raw .pkt files. | No default | ### Scheduling Schedules can be defined for importing and exporting via `import` and `export` under `schedule`. Each entry is allowed a "free form" text and/or special indicators for immediate export or watch file triggers. * `@immediate`: A message will be immediately exported if this trigger is defined in a schedule. Only used for `export`. * `@watch:/path/to/file`: This trigger watches the path specified for changes and will trigger an import or export when such events occur. Only used for `import`. * Free form [Later style](https://bunkat.github.io/later/parsers.html#text) text — can be things like `at 5:00 pm` or `every 2 hours`. See [Later text parsing documentation](http://bunkat.github.io/later/parsers.html#text) for more information. #### Example Schedule Configuration ```hjson { scannerTossers: { ftn_bso: { schedule: { import: every 1 hours or @watch:/path/to/watchfile.ext export: every 1 hours or @immediate } } } } ``` ### A More Complete Example Below is a more complete example showing the sections described above. ```hjson scannerTossers: { ftn_bso: { schedule: { // Check every 30m, or whenever the "toss!.now" file is touched (ie: by Binkd) import: every 30 minutes or @watch:/enigma-bbs/mail/ftn_in/toss!.now // Export immediately, but also check every 15m to be sure export: every 15 minutes or @immediate } // optional paths: { reject: /path/to/store/bad/packets/ retain: /path/to/store/good/packets/ } // Override default FTN/BSO packet encoding. Defaults to 'utf8' packetMsgEncoding: utf8 defaultNetwork: fsxnet nodes: { "21:1/100" : { // May also contain wildcards, ie: "21:1/*" archiveType: ZIP // By-ext archive type: ZIP, ARJ, ..., optional. encoding: utf8 // Encoding for exported messages packetPassword: MUHPA55 // FTN .PKT password, optional tic: { // See TIC docs } } } netMail: { // See NetMail docs } ticAreas: { // See TIC docs } } } ``` ## Binkd Since Binkd is a very common mailer, a few tips on integrating it with ENiGMA½. ### Example Binkd Configuration Below is an **example** Binkd configuration file that may help serve as a reference. ```bash # Number @ end is the root zone # Note that fsxNet is our *default* FTN so we use "outbound" here! domain fsxnet /home/enigma/enigma-bbs/mail/ftn_out/outbound 21 domain araknet /home/enigma/enigma-bbs/mail/ftn_out/araknet 10 # Our assigned addresses address 21:1/1234@fsxnet address 10:101/1234@araknet # Info about our board/op sysname "My BBS" location "Somewhere Out There" sysop "SysOp" nodeinfo 115200,TCP,BINKP try 10 hold 600 send-if-pwd log /var/log/binkd/binkd.log loglevel 4 conlog 4 percents printq backresolv inbound /home/enigma/enigma-bbs/mail/ftn_in temp-inbound /home/enigma/enigma-bbs/mail/ftn_in_temp minfree 2048 minfree-nonsecure 2048 kill-dup-partial-files kill-old-partial-files 86400 prescan # fsxNet - Agency HUB node 21:1/100@fsxnet -md fsxnet.nz:24556 SOMEPASS c # ArakNet node 10:101/0@araknet -md whq.araknet.xyz:24556 SOMEPASS c # our listening port (default=24554) iport 54554 pid-file /var/run/binkd/binkd.pid # touch a watch file when files are received to kick of toss # ENiGMA can monitor this (see @watch information above) flag /home/enigma/enigma-bbs/mail/ftn_in/toss!.now *.su? *.mo? *.tu? *.we? *.th? *.fr? *.sa? *.pkt *.tic # nuke old .bsy/.csy files after 24 hours kill-old-bsy 43200 ``` ### Scheduling Polls Binkd does not have it's own scheduler. Instead, you'll need to set up an Event Scheduler entry or perhaps a cron job: First, create a script that runs through all of your uplinks. For example: ```bash #!/bin/bash UPLINKS=("21:1/100@fsxnet" "80:774/1@retronet" "10:101/0@araknet") for uplink in "${UPLINKS[@]}" do /usr/local/sbin/binkd -p -P $uplink /home/enigma/xibalba/misc/binkd_xibalba.conf done ``` Now, create an Event Scheduler entry in your `config.hjson`. As an example: ```hjson eventScheduler: { events: { pollWithBink: { // execute the script above very 1 hours schedule: every 1 hours action: @execute:/path/to/poll_bink.sh } } } ``` ## Additional Resources * [Blog entry on setting up ENiGMA + Binkd on CentOS7](https://l33t.codes/enigma-12-binkd-on-centos-7/). Note that this references an **older version**, so be wary of the `config.hjson` references! * [Setting up FTN-style message networks with ENiGMA½ BBS](https://medium.com/@alpha_11845/setting-up-ftn-style-message-networks-with-enigma%C2%BD-bbs-709b22a1ae0d) by Alpha.