Menu HSJON
Menu HJSON
The core of a ENiGMA½ based BBS is it’s menus driven by what will be referred to as menu.hjson. Throughout ENiGMA½ documentation, when menu.hjson is referenced, we’re actually talking about config/menus/yourboardname-*.hjson. These files determine the menus (or screens) a user can see, the order they come in, how they interact with each other, ACS configuration, and so on. Like all configuration within ENiGMA½, menu configuration is done in HJSON format.
See also HJSON General Information for more information on the HJSON file format.
Entries in menu.hjson are often referred to as blocks or sections. Each entry defines a menu. A menu in this sense is something the user can see or visit. Examples include but are not limited to:
- Classical navigation and menus such as Main, Messages, and Files.
- Art file display.
- Module driven menus such as door launchers, Onelinerz, and other custom mods.
Menu entries live under the menus section of menu.hjson. The key for a menu is it’s name that can be referenced by other menus and areas of the system.
Below is a very basic menu entry called showSomeArt that displays some art then returns to the previous menu after the user hits a key:
showSomeArt: {
art: someart.ans
config: { pause: true }
}
As you can see a menu can be very simple.
Remember that the top level menu may include additional files using the includes directive. See Configuration Files for more information on this.
Common Menu Entry Members
Below is a table of common menu entry members. These members apply to most entries, though entries that are backed by a specialized module (ie: module: bbs_list) may differ. Menus that use their own module contain a module declaration:
module: some_fancy_module
See documentation for the module in question for particulars.
| Item | Description |
|---|---|
desc |
A friendly description that can be found in places such as “Who’s Online” or wherever the %MD MCI code is used. |
art |
An art file spec. See General Art Information. |
next |
Specifies the menu to go to next. Can be explicit or an array of possibilities dependent on ACS. See Flow Control in the ACS Checks section below. If next is not supplied, the next menu is this menus parent. Note that special built in methods such as @systemMethod:logoff can also be utilized here. |
prompt |
Specifies a prompt, by name, to use along with this menu. Prompts are configured in the prompts section. See Prompts for more information. |
submit |
Defines a submit handler when using prompt. |
form |
An object defining one or more forms available on this menu. |
module |
Sets the module name to use for this menu. The system ships with many build in modules or you can build your own! |
config |
An object containing additional configuration. See Config Block below. |
Config Block
The config block for a menu entry can contain common members as well as a per-module (when module is used) settings.
| Item | Description |
|---|---|
cls |
If true the screen will be cleared before showing this menu. |
pause |
If true a pause will occur after showing this menu. Useful for simple menus such as displaying art or status screens. |
nextTimeout |
Sets the number of milliseconds before the system will automatically advanced to the next menu. |
baudRate |
See baud rate information in General Art Information. |
font |
Sets a SyncTERM style font to use when displaying this menus art. See font listing in General Art Information. |
menuFlags |
An array of menu flag(s) controlling menu behavior. See Menu Flags below. |
Menu Flags
The menuFlags field of a config block can change default behavior of a particular menu.
| Flag | Description |
|---|---|
noHistory |
Prevents the menu from remaining in the menu stack / history. When this flag is set, when the next menu falls back, this menu will be skipped and the previous menu again displayed instead. Example: menuA -> menuB(noHistory) -> menuC: Exiting menuC returns the user to menuA. |
popParent |
When this menu is exited, fall back beyond the parent as well. Often used in combination with noHistory. |
forwardArgs |
If set, when the next menu is entered, forward any extraArgs arguments to this menu on to it. |
Forms
ENiGMA½ uses a concept of forms in menus. A form is a collection of associated views. Consider a New User Application using the nua module: The default implementation utilizes a single form with multiple EditTextView views, a submit button, etc. Forms are identified by number starting with 0. A given menu may have mutiple forms (often associated with different states or screens within the menu).
Menus may also support more than one layout type by using a MCI key. A MCI key is a alpha-numerically sorted key made from 1:n MCI codes. This lets the system choose the appropriate set of form(s) based on theme or random art. An example of this may be a matrix menu: Perhaps one style of your matrix uses a vertical light bar (VM key) while another uses a horizontal (HM key). The system can discover the correct form to use by matching MCI codes found in the art to that of the available forms defined in menu.hjson.
For more information on views and associated MCI codes, see MCI Codes.
Submit Handlers
When a form is submitted, it’s data is matched against a submit handler. When a match is found, it’s action is performed. Note: Setting the value explicitly to null matches against any value.
Submit Actions
Submit actions are declared using the action member of a submit handler block. Actions can be kick off system/global or local-to-module methods, launch other menus, etc.
| Action | Description |
|---|---|
@menu:menuName |
Takes the user to the menuName menu |
@systemMethod:methodName |
Executes the system/global method methodName. See System Methods below. |
@method:methodName |
Executes methodName local to the calling module. That is, the module set by the module member of a menu entry. |
@method:/path/to/some_module.js:methodName |
Executes methodName exported by the module at /path/to/some_module.js. |
Advanced Action Handling
In addition to simple simple actions, action may also be:
- An array of objects containing ACS checks and a sub
actionif that ACS is matched. See Action Matches in the ACS documentation below for details. - An array of actions. In this case a random selection will be made. Example:
submit: [ { value: { command: "FOO" } action: [ // one of the following actions will be matched: "@menu:menuStyle1" "@menu:menuStyle2" ] } ]
Method Signature
Methods executed using @method, or @systemMethod have the following signature:
(callingMenu, formData, extraArgs, callback)
System Methods
Many built in global/system methods exist. Below are a few. See system_menu_method for more information.
| Method | Description |
|---|---|
login |
Performs a standard login. |
login2FA_OTP |
Performs a 2-Factor Authentication (2FA) One-Time Password (OTP) check, if configured for the user. |
logoff |
Performs a standard system logoff. |
prevMenu |
Goes to the previous menu. |
nextMenu |
Goes to the next menu (as set by next) |
prevConf |
Sets the users message conference to the previous available. |
nextConf |
Sets the users message conference to the next available. |
prevArea |
Sets the users message area to the previous available. |
nextArea |
Sets the users message area to the next available. |
setClientEncoding |
Sets the client encoding (such as cp437 and utf-8.) |
Example
Let’s look a couple basic menu entries:
telnetConnected: {
art: CONNECT
next: matrix
config: { nextTimeout: 1500 }
}
The above entry telnetConnected is set as the Telnet server’s first menu entry (set by firstMenu in the Telnet server’s config). The entry sets up a few things:
- A
artspec ofCONNECT. (See General Art Information). - A
nextentry up the next menu, by name, in the stack (matrix) that we’ll go to aftertelnetConnected. - An
configblock containing a singlenextTimeoutfield telling the system to proceed to thenext(matrix) entry automatically after 1500ms.
Now let’s look at matrix, the next entry from telnetConnected:
matrix: {
art: MATRIX
desc: Login Matrix
form: {
0: {
//
// Here we have a MCI key of "VM". In this case we could
// omit this level since no other keys are present.
//
VM: {
mci: {
VM1: {
submit: true
focus: true
items: [ "login", "apply", "log off" ]
argName: matrixSubmit
}
}
submit: {
*: [
{
value: { matrixSubmit: 0 }
action: @menu:login
}
{
value: { matrixSubmit: 1 },
action: @menu:newUserApplication
}
{
value: { matrixSubmit: 2 },
action: @menu:logoff
}
]
}
}
//
// If we wanted, we could declare a "HM" MCI key block here.
// This would allow a horizontal matrix style when the matrix art
// loaded contained a %HM code.
//
}
}
}
In the above entry, you’ll notice form. This defines a form(s) object. In this case, a single form by ID of 0. The system is then told to use a block only when the resulting art provides a VM (VerticalMenuView) MCI entry. Some other bits about the form:
-
VM1is then setup tosubmitand start focused viafocus: trueas well as have some menu entries (“login”, “apply”, …) defined. We provide anargNameofmatrixSubmitfor this element view. - The
submitobject tells the system to attempt to apply provided match entries from any view ID (*). - Upon submit, the first match will be executed. For example, if the user selects “login”, the first entry with a value of
{ matrixSubmit: 0 }will match (due to 0 being the first index in the list andmatrixSubmitbeing the arg name in question) causingactionof@menu:loginto be executed (go tologinmenu).
Prompts
Prompts are found in the prompts section of menu files. Prompts allow for quick user input and shorthand form requirements for menus. Additionally, prompts are often used for for multiple menus. Consider a pause prompt or menu command input for example.
TODO: additional prompt docs
ACS Checks
Menu modules can check user ACS in order to restrict areas and perform flow control. See ACS for available ACS syntax.
Menu Access
To restrict menu access add an acs key to config. Example:
opOnlyMenu: {
desc: Ops Only!
config: {
acs: ID1
}
}
Action Matches
Action blocks (action) can perform ACS checks:
// ...
{
action: [
{
acs: SC1
action: @menu:secureMenu
}
{
action: @menu:nonSecureMenu
}
]
}
Flow Control
The next member of a menu may be an array of objects containing an acs check as well as the destination. Depending on the current user’s ACS, the system will pick the appropriate target. The last element in an array without an acs can be used as a catch all. Example:
login: {
desc: Logging In
next: [
{
// >= 2 calls else you get the full login
acs: NC2
next: loginSequenceLoginFlavorSelect
}
{
next: fullLoginSequenceLoginArt
}
]
}
Art Asset Selection
Another area in which you can apply ACS in a menu is art asset specs.
someMenu: {
desc: Neato Dorito
art: [
{
acs: GM[couriers]
art: COURIERINFO
}
{
// show ie: EVERYONEELSE.ANS to everyone else
art: EVERYONEELSE
}
]
}
Case Study: Adding a Sub Menu to Main
A very common task: You want to add a new menu accessible from “Main”. First, let’s create a new menu called “Snazzy Town”! Perhaps under the mainMenu entry somewhere, create a new menu:
snazzyTown: {
desc: Snazzy Town
art: snazzy
config: {
cls: true
pause: true
}
}
Now let’s make it accessible by “S” from the main menu. By default the main menu entry is named mainMenu. Within the mainMenu’s submit block you will see some existing action matches to “command”. Simply add a new one pointing to snazzyTown:
{
value: { command: "S" }
action: @menu:snazzyTown
}
That’s it! When users type “S” at the main menu, they’ll be sent to the Snazzy Town menu. Since we did not supply additional flow logic when they exit, they will fall back to main.
Case Study: Adding a New User Password (NUP)
You’ve got a super 31337 board and want to prevent lamerz! Let’s run through adding a NUP to your application flow.
Given the default menu system, two “pre” new user application menus exist due to the way Telnet vs SSH logins occur. We’ll focus only on Telnet here. This menu is newUserApplicationPre. Let’s say you want to display this preamble, but then ask for the NUP. If the user gets the password wrong, show them a LAMER.ANS and boot ‘em.
First, let’s create a new menu for the NUP:
newUserPassword: {
art: NUP.ANS
next: newUserApplication
desc: NUP!
form: {
0: {
mci: {
ET1: {
// here we create an argument/variable of "nup"
argName: nup
focus: true
submit: true
}
}
submit: {
*: [
{
// if the user submits "nup" with the correct
// value of "nolamerz" action will send
// them to the next menu defined above --
// in our case: newUserApplication
value: { nup: "nolamerz" }
action: @systemMethod:nextMenu
}
{
// anything else will result in going to the badNewUserPassword menu
value: { nup: null }
action: @menu:badNewUserPassword
}
]
}
}
}
}
Looks like we’ll need a badNewUserPassword menu as well! Let’s create a very basic menu to show art then disconnect the user.
badNewUserPassword: {
art: LAMER.ANS
// here we use a built in system method to boot them.
next: @systemMethod:logoff
config: {
// wait 2s after showing the art before kicking them
nextTimeout: 2000
}
}
Great, we have a couple new menus. Now let’s just point to them. Remember the existing newUserApplicationPre menu? All that is left to do is point it’s next to our newUserPassword menu:
newUserApplicationPre: {
// easy! Just tell the system where to go next
next: newUserPassword
// note that the rest of this menu is omitted for clarity
}
Case Study: Manual Encoding Selection
Enigma½ tries to automatically determine the proper encoding for a client when it connects. Unfortunately, there are cases where the wrong encoding can be selected, resulting in terminal programs that are not supported. If your user base contains users that would like to connect with unsupported clients, one solution is to offer manual encoding selection.
This can be accomplished with the system method @systemMethod:setClientEncoding.
Simple example
A basic config to use this could look something like the following:
telnetConnected: {
art: CONNECT
next: clientSelectEncoding
config: { nextTimeout: 1500 }
}
clientSelectEncoding: {
art: CLTSEL.ASC
next: matrix
form: {
0: {
mci: {
HM1: {
submit: true
hotKeys: { U: 0, C: 1 }
hotKeysSubmit: true
focus: true
argName: encoding
items: [
{
text: U) UTF-8
data: utf-8
}
{
text: C) CP437
data: cp437
}
]
}
}
submit: {
*: [
{
value: { encoding: null }
action: @systemMethod:setClientEncoding
}
]
}
}
}
}
The artfile for this should not contain extended characters, a simple file list the following should work:
Choose your encoding:
%HM1
Auto selection example
The above example can be further extended to default to the automatically detected encoding by using a slightly more complicated menu system:
```hjson
telnetConnected: { art: CONNECT next: [ { acs: EC0 next: clientSelectCP437 } { next: clientSelectUTF8 } ] config: { nextTimeout: 1500 } }
clientSelectUTF8: { art: CLTSEL.ASC next: matrix config: { font: utf-8 } form: { 0: { mci: { HM1: { submit: true hotKeys: { U: 0, C: 1 } hotKeysSubmit: true focus: true argName: encoding focusItemIndex: 0 items: [ { text: U) UTF-8 data: utf-8 } { text: C) CP437 data: cp437 } ] } } submit: { *: [ { value: { encoding: null } action: @systemMethod:setClientEncoding } ] } } } }
clientSelectCP437: { art: CLTSEL.ASC next: matrix config: { font: cp437 } form: { 0: { mci: { HM1: { submit: true hotKeys: { U: 0, C: 1 } hotKeysSubmit: true focus: true argName: encoding focusItemIndex: 1 items: [ { text: U) UTF-8 data: utf-8 } { text: C) CP437 data: cp437 } ] } } submit: { *: [ { value: { encoding: null } action: @systemMethod:setClientEncoding } ] } } } }
Use the same artfile as the previous example.
Note: This example can be shortened by using @reference sections if desired.
The acs: sections above will send the user to a different menu depending on whether they have encoding CP437 using EC0 or anything else sent to the UTF8 menu. From there focusItemIndex chooses the default item.