--- layout: page title: Menu HSJON --- ## Menu HJSON The core of a ENiGMA½ based BBS is it's menus driven by what will be referred to as `menu.hjson`. Throughout ENiGMA½ documentation, when `menu.hjson` is referenced, we're actually talking about `config/menus/yourboardname-*.hjson`. These files determine the menus (or screens) a user can see, the order they come in, how they interact with each other, ACS configuration, and so on. Like all configuration within ENiGMA½, menu configuration is done in [HJSON](https://hjson.org/) format. > :information_source: See also [HJSON General Information](hjson.md) for more information on the HJSON file format. > :bulb: Entries in `menu.hjson` are often referred to as *blocks* or *sections*. Each entry defines a menu. A menu in this sense is something the user can see or visit. Examples include but are not limited to: * Classical navigation and menus such as Main, Messages, and Files. * Art file display. * Module driven menus such as [door launchers](../modding/local-doors.md), [Onelinerz](../modding/onelinzerz.md), and other custom mods. Menu entries live under the `menus` section of `menu.hjson`. The *key* for a menu is it's name that can be referenced by other menus and areas of the system. Below is a very basic menu entry called `showSomeArt` that displays some art then returns to the previous menu after the user hits a key: ```hjson showSomeArt: { art: someart.ans config: { pause: true } } ``` As you can see a menu can be very simple. > :information_source: Remember that the top level menu may include additional files using the `includes` directive. See [Configuration Files](config-files.md) for more information on this. ## Common Menu Entry Members Below is a table of **common** menu entry members. These members apply to most entries, though entries that are backed by a specialized module (ie: `module: bbs_list`) may differ. Menus that use their own module contain a `module` declaration: ```hjson module: some_fancy_module ``` See documentation for the module in question for particulars. | Item | Description | |--------|--------------| | `desc` | A friendly description that can be found in places such as "Who's Online" or wherever the `%MD` MCI code is used. | | `art` | An art file *spec*. See [General Art Information](../art/general.md). | | `next` | Specifies the menu to go to next. Can be explicit or an array of possibilities dependent on ACS. See **Flow Control** in the **ACS Checks** section below. If `next` is not supplied, the next menu is this menus parent. Note that special built in methods such as `@systemMethod:logoff` can also be utilized here. | | `prompt` | Specifies a prompt, by name, to use along with this menu. Prompts are configured in the `prompts` section. See **Prompts** for more information. | | `submit` | Defines a submit handler when using `prompt`. | `form` | An object defining one or more *forms* available on this menu. | | `module` | Sets the module name to use for this menu. The system ships with many build in modules or you can build your own! | | `config` | An object containing additional configuration. See **Config Block** below. | ### Config Block The `config` block for a menu entry can contain common members as well as a per-module (when `module` is used) settings. | Item | Description | |------|-------------| | `cls` | If `true` the screen will be cleared before showing this menu. | | `pause` | If `true` a pause will occur after showing this menu. Useful for simple menus such as displaying art or status screens. | | `nextTimeout` | Sets the number of **milliseconds** before the system will automatically advanced to the `next` menu. | | `baudRate` | See baud rate information in [General Art Information](../art/general.md). | | `font` | Sets a SyncTERM style font to use when displaying this menus `art`. See font listing in [General Art Information](../art/general.md). | | `menuFlags` | An array of menu flag(s) controlling menu behavior. See **Menu Flags** below. #### Menu Flags The `menuFlags` field of a `config` block can change default behavior of a particular menu. | Flag | Description | |------|-------------| | `noHistory` | Prevents the menu from remaining in the menu stack / history. When this flag is set, when the **next** menu falls back, this menu will be skipped and the previous menu again displayed instead. Example: menuA -> menuB(noHistory) -> menuC: Exiting menuC returns the user to menuA. | | `popParent` | When *this* menu is exited, fall back beyond the parent as well. Often used in combination with `noHistory`. | | `forwardArgs` | If set, when the next menu is entered, forward any `extraArgs` arguments to *this* menu on to it. | ## Forms ENiGMA½ uses a concept of *forms* in menus. A form is a collection of associated *views*. Consider a New User Application using the `nua` module: The default implementation utilizes a single form with multiple EditTextView views, a submit button, etc. Forms are identified by number starting with `0`. A given menu may have mutiple forms (often associated with different states or screens within the menu). Menus may also support more than one layout type by using a *MCI key*. A MCI key is a alpha-numerically sorted key made from 1:n MCI codes. This lets the system choose the appropriate set of form(s) based on theme or random art. An example of this may be a matrix menu: Perhaps one style of your matrix uses a vertical light bar (`VM` key) while another uses a horizontal (`HM` key). The system can discover the correct form to use by matching MCI codes found in the art to that of the available forms defined in `menu.hjson`. For more information on views and associated MCI codes, see [MCI Codes](../art/mci.md). ## Submit Handlers When a form is submitted, it's data is matched against a *submit handler*. When a match is found, it's *action* is performed. Note: Setting the value explicitly to null matches against any value. ### Submit Actions Submit actions are declared using the `action` member of a submit handler block. Actions can be kick off system/global or local-to-module methods, launch other menus, etc. | Action | Description | |--------|-------------| | `@menu:menuName` | Takes the user to the *menuName* menu | | `@systemMethod:methodName` | Executes the system/global method *methodName*. See **System Methods** below. | | `@method:methodName` | Executes *methodName* local to the calling module. That is, the module set by the `module` member of a menu entry. | | `@method:/path/to/some_module.js:methodName` | Executes *methodName* exported by the module at */path/to/some_module.js*. | #### Advanced Action Handling In addition to simple simple actions, `action` may also be: * An array of objects containing ACS checks and a sub `action` if that ACS is matched. See **Action Matches** in the ACS documentation below for details. * An array of actions. In this case a random selection will be made. Example: ```hjson submit: [ { value: { command: "FOO" } action: [ // one of the following actions will be matched: "@menu:menuStyle1" "@menu:menuStyle2" ] } ] ``` #### Method Signature Methods executed using `@method`, or `@systemMethod` have the following signature: ``` (callingMenu, formData, extraArgs, callback) ``` #### System Methods Many built in global/system methods exist. Below are a few. See [system_menu_method](/core/system_menu_method.js) for more information. | Method | Description | |--------|-------------| | `login` | Performs a standard login. | | `login2FA_OTP` | Performs a 2-Factor Authentication (2FA) One-Time Password (OTP) check, if configured for the user. | | `logoff` | Performs a standard system logoff. | | `prevMenu` | Goes to the previous menu. | | `nextMenu` | Goes to the next menu (as set by `next`) | | `prevConf` | Sets the users message conference to the previous available. | | `nextConf` | Sets the users message conference to the next available. | | `prevArea` | Sets the users message area to the previous available. | | `nextArea` | Sets the users message area to the next available. | | `setClientEncoding` | Sets the client encoding (such as cp437 and utf-8.) | ## Example Let's look a couple basic menu entries: ```hjson telnetConnected: { art: CONNECT next: matrix config: { nextTimeout: 1500 } } ``` The above entry `telnetConnected` is set as the Telnet server's first menu entry (set by `firstMenu` in the Telnet server's config). The entry sets up a few things: * A `art` spec of `CONNECT`. (See [General Art Information](../art/general.md)). * A `next` entry up the next menu, by name, in the stack (`matrix`) that we'll go to after `telnetConnected`. * An `config` block containing a single `nextTimeout` field telling the system to proceed to the `next` (`matrix`) entry automatically after 1500ms. Now let's look at `matrix`, the `next` entry from `telnetConnected`: ```hjson matrix: { art: MATRIX desc: Login Matrix form: { 0: { // // Here we have a MCI key of "VM". In this case we could // omit this level since no other keys are present. // VM: { mci: { VM1: { submit: true focus: true items: [ "login", "apply", "log off" ] argName: matrixSubmit } } submit: { *: [ { value: { matrixSubmit: 0 } action: @menu:login } { value: { matrixSubmit: 1 }, action: @menu:newUserApplication } { value: { matrixSubmit: 2 }, action: @menu:logoff } ] } } // // If we wanted, we could declare a "HM" MCI key block here. // This would allow a horizontal matrix style when the matrix art // loaded contained a %HM code. // } } } ``` In the above entry, you'll notice `form`. This defines a form(s) object. In this case, a single form by ID of `0`. The system is then told to use a block only when the resulting art provides a `VM` (*VerticalMenuView*) MCI entry. Some other bits about the form: * `VM1` is then setup to `submit` and start focused via `focus: true` as well as have some menu entries ("login", "apply", ...) defined. We provide an `argName` of `matrixSubmit` for this element view. * The `submit` object tells the system to attempt to apply provided match entries from any view ID (`*`). * Upon submit, the first match will be executed. For example, if the user selects "login", the first entry with a value of `{ matrixSubmit: 0 }` will match (due to 0 being the first index in the list and `matrixSubmit` being the arg name in question) causing `action` of `@menu:login` to be executed (go to `login` menu). ## Prompts Prompts are found in the `prompts` section of menu files. Prompts allow for quick user input and shorthand form requirements for menus. Additionally, prompts are often used for for multiple menus. Consider a pause prompt or menu command input for example. TODO: additional prompt docs ## ACS Checks Menu modules can check user ACS in order to restrict areas and perform flow control. See [ACS](acs.md) for available ACS syntax. ### Menu Access To restrict menu access add an `acs` key to `config`. Example: ``` opOnlyMenu: { desc: Ops Only! config: { acs: ID1 } } ``` ### Action Matches Action blocks (`action`) can perform ACS checks: ``` // ... { action: [ { acs: SC1 action: @menu:secureMenu } { action: @menu:nonSecureMenu } ] } ``` ### Flow Control The `next` member of a menu may be an array of objects containing an `acs` check as well as the destination. Depending on the current user's ACS, the system will pick the appropriate target. The last element in an array without an `acs` can be used as a catch all. Example: ``` login: { desc: Logging In next: [ { // >= 2 calls else you get the full login acs: NC2 next: loginSequenceLoginFlavorSelect } { next: fullLoginSequenceLoginArt } ] } ``` ### Art Asset Selection Another area in which you can apply ACS in a menu is art asset specs. ```hjson someMenu: { desc: Neato Dorito art: [ { acs: GM[couriers] art: COURIERINFO } { // show ie: EVERYONEELSE.ANS to everyone else art: EVERYONEELSE } ] } ``` ## Case Study: Adding a Sub Menu to Main A very common task: You want to add a new menu accessible from "Main". First, let's create a new menu called "Snazzy Town"! Perhaps under the `mainMenu` entry somewhere, create a new menu: ```hjson snazzyTown: { desc: Snazzy Town art: snazzy config: { cls: true pause: true } } ``` Now let's make it accessible by "S" from the main menu. By default the main menu entry is named `mainMenu`. Within the `mainMenu`'s `submit` block you will see some existing action matches to "command". Simply add a new one pointing to `snazzyTown`: ```hjson { value: { command: "S" } action: @menu:snazzyTown } ``` That's it! When users type "S" at the main menu, they'll be sent to the Snazzy Town menu. Since we did not supply additional flow logic when they exit, they will fall back to main. ## Case Study: Adding a New User Password (NUP) You've got a super 31337 board and want to prevent lamerz! Let's run through adding a NUP to your application flow. Given the default menu system, two "pre" new user application menus exist due to the way Telnet vs SSH logins occur. We'll focus only on Telnet here. This menu is `newUserApplicationPre`. Let's say you want to display this preamble, but then ask for the NUP. If the user gets the password wrong, show them a `LAMER.ANS` and boot 'em. First, let's create a new menu for the NUP: ```hjson newUserPassword: { art: NUP.ANS next: newUserApplication desc: NUP! form: { 0: { mci: { ET1: { // here we create an argument/variable of "nup" argName: nup focus: true submit: true } } submit: { *: [ { // if the user submits "nup" with the correct // value of "nolamerz" action will send // them to the next menu defined above -- // in our case: newUserApplication value: { nup: "nolamerz" } action: @systemMethod:nextMenu } { // anything else will result in going to the badNewUserPassword menu value: { nup: null } action: @menu:badNewUserPassword } ] } } } } ``` Looks like we'll need a `badNewUserPassword` menu as well! Let's create a very basic menu to show art then disconnect the user. ```hjson badNewUserPassword: { art: LAMER.ANS // here we use a built in system method to boot them. next: @systemMethod:logoff config: { // wait 2s after showing the art before kicking them nextTimeout: 2000 } } ``` Great, we have a couple new menus. Now let's just point to them. Remember the existing `newUserApplicationPre` menu? All that is left to do is point it's `next` to our `newUserPassword` menu: ```hjson newUserApplicationPre: { // easy! Just tell the system where to go next next: newUserPassword // note that the rest of this menu is omitted for clarity } ``` ## Case Study: Manual Encoding Selection Enigma½ tries to automatically determine the proper encoding for a client when it connects. Unfortunately, there are cases where the wrong encoding can be selected, resulting in terminal programs that are not supported. If your user base contains users that would like to connect with unsupported clients, one solution is to offer manual encoding selection. This can be accomplished with the system method `@systemMethod:setClientEncoding`. ### Simple example A basic config to use this could look something like the following: ```hjson telnetConnected: { art: CONNECT next: clientSelectEncoding config: { nextTimeout: 1500 } } clientSelectEncoding: { art: CLTSEL.ASC next: matrix form: { 0: { mci: { HM1: { submit: true hotKeys: { U: 0, C: 1 } hotKeysSubmit: true focus: true argName: encoding items: [ { text: U) UTF-8 data: utf-8 } { text: C) CP437 data: cp437 } ] } } submit: { *: [ { value: { encoding: null } action: @systemMethod:setClientEncoding } ] } } } } ``` The artfile for this should not contain extended characters, a simple file list the following should work: ``` Choose your encoding: %HM1 ``` ### Auto selection example The above example can be further extended to default to the automatically detected encoding by using a slightly more complicated menu system: ```hjson telnetConnected: { art: CONNECT next: [ { acs: EC0 next: clientSelectCP437 } { next: clientSelectUTF8 } ] config: { nextTimeout: 1500 } } clientSelectUTF8: { art: CLTSEL.ASC next: matrix config: { font: utf-8 } form: { 0: { mci: { HM1: { submit: true hotKeys: { U: 0, C: 1 } hotKeysSubmit: true focus: true argName: encoding focusItemIndex: 0 items: [ { text: U) UTF-8 data: utf-8 } { text: C) CP437 data: cp437 } ] } } submit: { *: [ { value: { encoding: null } action: @systemMethod:setClientEncoding } ] } } } } clientSelectCP437: { art: CLTSEL.ASC next: matrix config: { font: cp437 } form: { 0: { mci: { HM1: { submit: true hotKeys: { U: 0, C: 1 } hotKeysSubmit: true focus: true argName: encoding focusItemIndex: 1 items: [ { text: U) UTF-8 data: utf-8 } { text: C) CP437 data: cp437 } ] } } submit: { *: [ { value: { encoding: null } action: @systemMethod:setClientEncoding } ] } } } } Use the same artfile as the previous example. *Note*: This example can be shortened by using @reference sections if desired. The `acs:` sections above will send the user to a different menu depending on whether they have encoding CP437 using `EC0` or anything else sent to the UTF8 menu. From there `focusItemIndex` chooses the default item.