--- layout: page title: Message Networks --- Configuring message networks in ENiGMA½ requires three specific pieces of config - the network and your assigned address on it, the message areas (echos) of the network you wish to map to ENiGMA½ message areas, then the schedule and routes to send mail packets on the network. ## FTN Networks FTN networks are configured under the `messageNetworks::ftn` section of `config.hjson`. The `networks` section contains a sub section for each network you wish you join your board to. Each entry's key name is referenced elsewhere in `config.hjson` for FTN oriented configurations. ### Example Configuration ```hjson { messageNetworks: { ftn: { networks: { agoranet: { localAddress: "46:3/102" } fsxnet: { localAddress: "21:4/333" } } } } } ``` ## Message Areas The `areas` section describes a mapping of local **area tags** configured in your `messageConferences` (see [Configuring a Message Area](configuring-a-message-area.md)) to a message network (described above), a FTN specific area tag, and remote uplink address(s). This section can be thought of similar to the *AREAS.BBS* file used by other BBS packages. When ENiGMA½ imports messages, they will be placed in the local area that matches key under `areas`. | Config Item | Required | Description | |-------------|----------|----------------------------------------------------------| | `network` | :+1: | Associated network from the `networks` section above | | `tag` | :+1: | FTN area tag | | `uplinks` | :+1: | An array of FTN address uplink(s) for this network | ### Example Configuration ```hjson { messageNetworks: { ftn: { areas: { agoranet_bbs: { // tag found within messageConferences network: agoranet tag: AGN_BBS uplinks: "46:1/100" } } } } } ```